Process flow arrangement of mold processing

Release time:

2021/09/16

Source:

RUIXIN MACHINERY

1、Bottom surface processing, processing volume assurance.

2、Foundation of casting blank, 2D and 3D type surface allowance check.

3、Rough machining of 2D, 3D type surface, non-installation non-working plane machining (including safety platform surface, buffer mounting surface, pressure plate surface, side datum surface).

4、Before semi-finishing machining, the side datum surface is corrected to ensure accuracy.

5、Semi-finishing 2D, 3D type surface, finishing all kinds of installation work surface (including limit block mounting surface and contact surface, block mounting surface and back side, punch mounting surface, scrap cutter mounting surface and back side, spring mounting surface and contact surface, all kinds of travel limit work surface, tilt wedge mounting surface and back side), semi-finishing all kinds of guide surface, guide hole, leaving margin finishing process reference hole and height reference surface, and record data.

6、Check and review the machining accuracy.

7、Clamp work inlay process.

8、Before finishing, the process reference hole datum surface to find the right, set block margin check.

9、Finishing surface 2D, 3D, side punching surface and hole position, finishing process reference hole and height reference, finishing guide surface and guide hole.

10、Check and review the machining accuracy.

Key words:

Parts processing

Previous article

Some notes on mold processing

Things to note when machining parts in a machine shop

Next

Other dynamics

CNC handpiece machining is a traditional machining process

Many R & D enterprises just developed a new product in the absence of open molds, are required to hand-plate prototype, first play a sample or several samples, first test its structure, function, appearance and other rationality. cnc hand-plate processing is a traditional processing technology, its processing out of the material characteristics with high strength,

Machining of mechanical parts, large quantity and high quality

The customer sent a set of 3D engineering drawings to the customer service department and asked if our factory could machine it. After the technical department reviewed the customer's drawing, the part could be machined by CNC lathe.

Basic features, processes and considerations for mold processing

Die processing refers to the processing of forming and blanking tools, which also includes die cutting and shearing dies. Usually the die consists of an upper die and a lower die set, where the material is shaped by the action of a press, with the steel plate placed between the upper and lower die. When the press is opened, the workpiece determined by the shape of the die is obtained or the corresponding scrap is removed. Workpieces as large as an automotive dashboard or as small as an electronic connector can be formed with a die.

Precision parts processing, the appearance must look good

In many cases, superficial work should be derogatory most of the time, but superficial work on parts finishing is certainly a sign of competitiveness. Today's customers are looking for higher aesthetic requirements,

Machining process protocols for mechanical parts

Process procedures for machining, technical personnel according to the number of products, equipment conditions and quality of workers, etc., to determine the process used, and the relevant content written into the process documents, such documents are called process procedures.

Some notes on mold processing

process preparation concise, detailed expression, processing content as much as possible numerical expression.

Ruixin Machinery

TEL：

0086-0631-6088677

E-MAIL：

N13361172775@163.com

ADD：

No.12-2, Xincheng Street, Rushan City, Weihai City, Shandong Province